注塑工艺一次成型，永久防静电
Part Number Size
930-1 24" X36"( 0.6mX0.9m) Thick: 1/2"( 12.5mm)
930-2 36"X48"(0.9m X 1.2m) Thick:1/2"( 12.5mm)
RTT: 1x10^6 to 1X10^8 ohms(表面电阻值）
Quantity in Stock: 123
- 100% Premium Nitrile Butadiene Homogenous Rubber (non-humidity dependent)
Better value, consistent electrical properties, prevents discoloring and delamination
Ergonomic Design Dome / Support Cell Structure
Suspended bounce feel, and matrix of “tri-radial” supports firming up as weight is applied improves worker comfort and productivity
Patented Interlocking Edge (Patent No. 5,907,934)
Easily configures to fit your requirements; no need to order special lengths Attractive beveled edge end finish allows you to use it as a stand-alone mat.
- Tested for Cleanrooms; Minimal Particulation
Suitable for use in critical environments; used in Class 1000 cleanrooms
Exceed ANSI/ESD S20.20 required limit of <1 x 10E9 ohms for ESD floor
- Suitable as floor in ANSI/ESD STM 97.1 floor-footwear system
- Grounding Hardware NOT included
Individual mats should be grounded. Linked mats should be grounded 10-12 feet.
- Superior Warranty
Lead-free RoHS compliant
- Made in China
*Conductive (<10E6) as defined by ANSI/ESD S7.1, Floor Materials – Characterization of Materials.
**Designed to exceed requirements of ANSI/ESD S20.20 for primary ground of mobile operators, Flooring / Footwear System – Method 1, <3.5 X 10E7 Operator Resistance to ground, tested per ANSI/ESD STM 97.1, Floor Materials and Footwear – Resistance Measurement in Combination with a Person, when used with proper ESD foot grounders.
“ESD protective flooring, used with approved footwear, may be used as an alternative to the wrist strap system for standing operations.” (ANSI/ESD S20.20 section 6.2.2.2 Personnel Grounding Guidance)
“The use of floor materials to control personnel or equipment generated static has a number of benefits. Floor materials tend to be passive. Employees who work in areas protected with floor materials simply need to wear and test the appropriate footwear. They do not need to implement any additional actions themselves to assure that the floor material is functioning properly.” (ESD Handbook TR20.20 section 5.3.4.4)
|
点击这里与我们MSN沟通
